01
Compare flow and pressure together
Evaluate the listed 41 CFM at 125 PSI against the required airflow and pressure at the point of use. A horsepower-only comparison does not establish application fit.
OMORFO ROTARY SCREW COMPRESSOR
Omorfo OM10S-T 10 HP rotary screw air compressor
The Omorfo OM10S-T is a tank-mounted rotary screw air compressor rated at 10 HP and 41 CFM at 125 PSI. Its listed electrical supply is 230/460 V, 3-phase, 60 Hz, and its published sound rating is 62 dB.
OM10S-T model detail
Tank-mounted
- Motor
- 10 HP
- Rated airflow
- 41 CFM
- Rated pressure
- 125 PSI
- Sound rating
- 62 dB
MODEL OVERVIEW
Evaluate the OM10S-T against measured demand.
The OM10S-T becomes a useful candidate when a documented air-demand study can be compared with 41 CFM at the stated 125 PSI rating. Add the demand of equipment that can operate at the same time and account for pressure loss through piping and air-treatment components before deciding whether that output is appropriate.
Its tank-mounted configuration is an important placement detail, but the compressor model alone does not define the complete air system. Confirm service clearance, electrical configuration, dryer and filter requirements, condensate handling, and the distribution connection for the actual installation.
OM10S-T published specifications
- Model
- OM10S-T
- Motor power
- 10 HP
- Rated pressure
- 125 PSI
- Rated airflow
- 41 CFM
- Electrical supply
- 230/460 V, 3-phase, 60 Hz
- Published sound rating
- 62 dB
- Mounting
- Tank-mounted
Specification notice: Published values are based on current manufacturer information. Specifications and configurations can change and must be confirmed with Bluegrass Air Power and Omorfo for the unit being quoted or ordered.
Review Omorfo's current rotary compressor information (opens in a new tab)APPLICATION FIT
Where the OM10S-T enters the selection process
Published output establishes a comparison point. The application, demand pattern, site, and complete air-system design determine whether this specific model belongs in a final quote.
02
Review the tank-mounted layout
Confirm that the tank-mounted arrangement fits the available location, service access, piping route, and the receiver strategy for the complete compressed-air system.
03
Verify power and sound conditions
Confirm the ordered 230/460 V, 3-phase, 60 Hz electrical configuration and ask how the published 62 dB rating relates to the intended compressor-room environment.
BEFORE A QUOTE
Questions to answer before choosing the OM10S-T
Bring these answers to the equipment conversation. Clear operating requirements are more useful than choosing from horsepower alone.
Discuss the OM10S-T- Which tools or processes can run at the same time, and what is their combined CFM demand at the required pressure?
- After expected piping, dryer, filter, and regulator losses, does the 125 PSI rating support the required point-of-use pressure?
- Does the tank-mounted configuration fit the available floor area, access path, and maintenance clearances?
- Which listed voltage configuration will be ordered, and has 3-phase, 60 Hz service been confirmed at the installation point?
- How should the published 62 dB sound rating be evaluated for the proposed room and adjacent work areas?
- What drying, filtration, drainage, and distribution components are required for the application?
NEXT STEPS
Plan the compressor as part of the full air system.
Selection, site requirements, air treatment, and ordered configuration should be evaluated together. These resources help turn the model rating into a better-scoped project discussion.
Size the load
Compressor sizing guide
Organize CFM, PSI, runtime, power, and site details before comparing equipment.
Read the guide →Prepare the request
Application quote
Share demand, pressure, electrical, site, and timeline details for a focused equipment and pricing conversation.
Request a quote →Compare the category
Rotary screw guide
Review duty cycle, controls, site conditions, air quality, and lifecycle questions.
Compare decisions →Local supplier
Henderson, Kentucky
Learn how Bluegrass Air Power approaches industrial compressor selection across the Ohio Valley.
View local options →RELATED MODELS
Compare other listed Omorfo compressors.
HENDERSON, KENTUCKY • OHIO VALLEY
Get a focused OM10S-T quote.
Share your required CFM and PSI, operating schedule, electrical service, air-quality needs, and installation constraints with Bluegrass Air Power in Henderson.