01
Define the 64 CFM load envelope
Separate normal demand from short peaks and planned additions, then compare those figures with the model's 64 CFM rating at 125 PSI.
OMORFO ROTARY SCREW COMPRESSOR
Omorfo OM15S-T 15 HP rotary screw air compressor
The Omorfo OM15S-T is a tank-mounted rotary screw air compressor rated at 15 HP and 64 CFM at 125 PSI. Omorfo lists 230/460 V, 3-phase, 60 Hz electrical supply and a 65 dB sound rating for this model.
OM15S-T model detail
Tank-mounted
- Motor
- 15 HP
- Rated airflow
- 64 CFM
- Rated pressure
- 125 PSI
- Sound rating
- 65 dB
MODEL OVERVIEW
Evaluate the OM15S-T against measured demand.
The OM15S-T should be compared with a measured or carefully calculated demand profile rather than selected from its 15 HP motor rating alone. Its published performance point is 64 CFM at 125 PSI, so both values need to be tested against simultaneous production demand and the pressure required downstream.
The listed tank-mounted arrangement affects how the model fits a room and connects to the balance of the system. Installation planning still needs to address access, electrical service, ventilation, piping, air treatment, drains, and any site-specific operating constraints before the configuration is confirmed.
OM15S-T published specifications
- Model
- OM15S-T
- Motor power
- 15 HP
- Rated pressure
- 125 PSI
- Rated airflow
- 64 CFM
- Electrical supply
- 230/460 V, 3-phase, 60 Hz
- Published sound rating
- 65 dB
- Mounting
- Tank-mounted
Specification notice: Published values are based on current manufacturer information. Specifications and configurations can change and must be confirmed with Bluegrass Air Power and Omorfo for the unit being quoted or ordered.
Review Omorfo's current rotary compressor information (opens in a new tab)APPLICATION FIT
Where the OM15S-T enters the selection process
Published output establishes a comparison point. The application, demand pattern, site, and complete air-system design determine whether this specific model belongs in a final quote.
02
Fit the tank-mounted configuration
Check the installation route, usable floor space, maintenance access, piping connection, and how the tank-mounted format fits the intended system layout.
03
Confirm site utilities
Verify the applicable 230/460 V, 3-phase, 60 Hz electrical configuration and review the published 65 dB rating in the context of the proposed location.
BEFORE A QUOTE
Questions to answer before choosing the OM15S-T
Bring these answers to the equipment conversation. Clear operating requirements are more useful than choosing from horsepower alone.
Discuss the OM15S-T- What are the operation's normal CFM demand and its highest simultaneous demand during a representative shift?
- Is the required pressure measured at the compressor or at the process after expected system pressure loss?
- Has any planned production growth been quantified before comparing it with the 64 CFM rating?
- Will the tank-mounted model pass through the delivery route and leave suitable access for inspection and maintenance?
- Which of the listed voltage configurations matches the facility's confirmed 3-phase, 60 Hz electrical service?
- Are the proposed location and nearby work areas compatible with the published 65 dB sound rating after installation conditions are reviewed?
- Which receiver, dryer, filters, drains, and piping components belong in the final system plan?
NEXT STEPS
Plan the compressor as part of the full air system.
Selection, site requirements, air treatment, and ordered configuration should be evaluated together. These resources help turn the model rating into a better-scoped project discussion.
Size the load
Compressor sizing guide
Organize CFM, PSI, runtime, power, and site details before comparing equipment.
Read the guide →Prepare the request
Application quote
Share demand, pressure, electrical, site, and timeline details for a focused equipment and pricing conversation.
Request a quote →Compare the category
Rotary screw guide
Review duty cycle, controls, site conditions, air quality, and lifecycle questions.
Compare decisions →Local supplier
Henderson, Kentucky
Learn how Bluegrass Air Power approaches industrial compressor selection across the Ohio Valley.
View local options →RELATED MODELS
Compare other listed Omorfo compressors.
HENDERSON, KENTUCKY • OHIO VALLEY
Get a focused OM15S-T quote.
Share your required CFM and PSI, operating schedule, electrical service, air-quality needs, and installation constraints with Bluegrass Air Power in Henderson.